dc-dc converter 01d-500 series non-isolated single output 0.45*0.3*0.4 temperature derating graph specifications typical at ta=25c, nominal input vo ltage and rated output current unless otherwise specified part number input range output voltage output current efficiency vdc vdc ma min.vin(%) max.vin(%) 01d-1r5-500 4.75-30 1.5 500 73 63 01d-1r8-500 4.75-34 1.8 500 82 71 01d-2r5-500 4.75-34 2.5 500 87 77 01d-3r3-500 4.75-34 3.3 500 91 81 01d-05-500 6.5-34 5.0 500 94 86 01d-6r5-500 8.0-34 6.5 500 95 88 01D-09-500 11-34 9.0 500 96 92 01d-12-500 15-34 12 500 97 94 01d-15-500 18-34 15 500 97 95 output specifications parameters conditions min typ max units voltage tolerance 3 % short circuit protection hiccup, automatic recovery line regulation 1.5v to 6.5v 0.4 % 9v to 15.5v 0.2 % load regulation 1.5v to 6.5v (10% to 100% f.l) 0.6 % 9v to 15.5v (10% to 100% f.l.) 0.4 % ripple & noise (without output capacitor) 1.5v to 6.5v (bw=dc to 20mhz) 30 mvp-p 9v to 15.5v (bw=dc to 20mhz) 40 mvp-p transient response setting time 25% load step change 350 us yuan dean scientific yuan dean scientific co.,ltd features 3pin sip package pin-out compatible with lm78xx linear efficiency up to 97%,non isolated, no need for heat sink customized solutions available ul94v-0 package material operating temperature from -40 to +85 3 years warranty short circuit protection, thermal shutdown 01d - 500 series rev:0 2018/10/31
general specifications parameters conditions min typ max units switching frequency 330 khz operating temperature with derating -40 85 humidity non condensing 95 % cooling natural convection (20lfm) case material non-conductive black plastic weight 2.0 g dimensions 11.6x7.6x10.4 mm mtbf(+25) using mil-hdbk 217f 21098x10 3 hours mtbf(+71) using mil-hdbk 217f 4212x10 3 hours application examples 01d - 500 series +vin -vin +vout -vout 01d-xxx-500 c1 3.3uf (vin>26v) input capacitor needed only if vin>26vdc part number dimensions pin assignment pin 1 2 3 function +vin gnd +vout yuan dean scientific co.,ltd rev:0 2018/10/31 add a blocking diode to vout if current can flow backwards into the output, as this can damage the converter when it is powered down. see application examples for details. 01d - 05 - 500 a b c a:series b:output voltage c:output current application examples +vin -vin c1 01d-xxx-500 c2 +vout com -vout dc/dc converter(1:1) -isolated dual outputs -wide input range 4.75v to 34v c1:optional,c2:required(further decoupling filterin g may be necessary between the two converters) high efficiency, isolated, dual unregulated outputs +vin -vin c1 c2 dc/dc converter(1:1) isolated (up to 6kv), wide input range regulated ou tput +vout -vout -high isolation voltage -improved loading / line regulation -wide input voltage range -point-of-load architecture c1:required (further decoupling filtering may be) necessary between the converters),c2:optional 01d-xxx-500
|
